TM 5-3805-261-20
COOLING SYSTEM MAINTENANCE. (cont)
6-36.
Radiator and Support. (Sheet 3 of 8)
REMOVAL
1.
Loosen two clamps (3, Figure 6-84). Slide
hose (1) back on tube (2).
2.
Remove two clamps (3).
3.
Remove nut (4), washer (5) and bolt (6)
from upper support plate (7).
4.
Loosen two clamps (8, Figure 6-85). Slide
clamps (8) and hose (9) back on tube (12).
5.
Remove bolt (29), washer (30) and clamp
(31) from tube (12) and fuel tank (32).
NOTE
All hose and tube assemblies must
be tagged before disconnecting to
aid in installation. CLIP all hose and
tube ends to prevent contamination.
6.
Loosen two clamps (10) and disconnect
hose (11).
7.
Remove two clamps (10) and hose (11).
8.
Remove tube (12).
Figure 6-84.
Figure 6-85.
Go to Sheet 4
6-120