TM 5-3805-261-20
COOLING SYSTEM MAINTENANCE. (cont)
6-36.
Radiator and Support. (Sheet 5 of 8)
REMOVAL (cont)
WARNING
Weight of radiator is 135 lbs. Use
adequate hoist and sling. Failure to
follow this procedure may cause
INJURY. If you are injured, seek
medical aid immediately.
18.
Using a hoist and sling, separate support
(22) and radiator (28, Figure 6-89). Slide
radiator (28) out from bottom of support
(22).
19.
Support radiator (28) on suitable backing.
20.
Remove hoist and sling, four 3/8-16 inch
nuts, 3/8-16 x 5-1/2 inch bolts and link
brackets (Figure 6-88).
21.
Remove two plates (23), four bolts (24),
washers (25) and brackets (26, Figure 6-
90).
NOTE
Remove
seal
only
if
inspection
indicates replacement is necessary.
22.
Remove and discard seal (27), if necessary.
Remove all old seal (27) material from
mounting surfaces of radiator (28).
Figure 6-90.
Go to Sheet 6
6-122
Figure 6-89.
Figure 6-88.
