TM 5-3805-261-20
COOLING SYSTEM MAINTENANCE.
6-37.
Shields, Baffles and Plates. (Sheet 4 of 6)
INSTALLATION
1.
Position baffle (58) and shield (57, Figure 6-
95) on front, lower right side of radiator and
support.
2.
Install two washers (56) and bolts (55). Do
not tighten bolts (55).
3.
Install clip (54), washer (53) and bolt (52)
securing harness assembly.
4.
Install clip (51), washer (50) and bolt (49)
securing hydraulic oil cooler hose.
5.
Tighten two bolts (55).
6.
Position baffle (48, Figure 6-94) on front,
upper right side of radiator and support.
7.
Install washer (47) and bolt (46) on front,
upper right side of radiator and support.
8.
Position shield (45).
9.
Install three washers (44) and bolts (43).
10.
Install clip (42), washer (41) and bolt (40)
securing hydraulic oil cooler hose.
11.
Install clip (39), washer (38) and bolt (37)
securing harness assembly.
Go to Sheet 5
6-129
