TM 5-3805-261-20
COOLING SYSTEM MAINTENANCE.
6-36.
Radiator and Support. (Sheet 6 of 8)
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
INSTALLATION
1.
If removed, install new seal (27, Figure 6-
90). Cut bulk seal to size. Install seal (27)
on top and sides of radiator (28).
NOTE
Do not cover overfill tube on top of
radiator.
2.
Position four brackets (26).
3.
Install four washers (25), bolts (24) and two
plates (23). Do not tighten bolts (24) or
plates (23).
4.
Install four link brackets, 3/8-16 x 5-1/2 inch
bolts, 3/8-16 inch nuts and hoist and sling
(Figure 6-88).
5.
Using a hoist and sling, install radiator (28,
Figure 6-89). Carefully slide radiator (28)
into support (22).
6.
Remove hoist and sling, four 3/8-16 inch
nuts, 3/8-16 x 5-1/2 inch bolts and link
brackets (Figure 6-88).
Go to Sheet 7
6-123