TM 5-3805-261-20FUEL SYSTEM MAINTENANCE.6-24.FuelTank.(Sheet 6 of 8)CLEANING1.Steam clean fuel tank (28). Dry thoroughlywith compressed air.2.Clean all parts. Refer to Chapter 2.INSPECTIONInspect all parts. Refer to Chapter 2.INSTALLATION1Attach hoist and sling to fuel tank (28,Figure 6-64) and position on vehicle.2.Install fuel tank (28) on mounting, alieningmounting holes with prybar.3.Remove hoist and sling.4.Install three bolts (27), six washers (26) andthree nuts (25, Figure 6-65) on lower, leftand right sides of fuel tank.5.Install clamp (32), washer (31) and bolt (30)to fuel tank (28).6.Install plug (24) and bolt (23, Figure 6-63)on left side of fuel tank (28). Tighten bolt(23) to 15 ft-lb torque.7.Position plate (22) on front, upper inside ofradiator support.8.Install bolt (21), washer (20) and nut (19).9.Install two bolts (21), washers (20) and nuts(19) on center, top rear of fuel tank securingplate (22) to fuel tank (28).Go to Sheet 76-89
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
