TM 5-3805-261-20
FUEL SYSTEM MAINTENANCE. (cont)
6-22
Fuel Tank Hoses, Lines and Fittings. (Sheet 4 of 6)
REMOVAL (cont)
14.
Remove elbow (24), preformed packing
(25), adapter (26) and preformed packing
(27, Figure 6-57). Discard preformed
packings (25 and 27).
15.
Remove valve (28) from fuel tank.
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
INSTALLATION
1.
Install valve (28, Figure 6-57) in fuel tank.
2.
Lubricate threaded bore in fuel filter with
clean diesel fuel before installing adapter
(26). Install new preformed packing (27),
adapter (26), new preformed packing (25)
and elbow (24).
3.
Install connector (23) in valve (28, Figure 6-
56).
4.
Install hose assembly (22).
5.
Install elbow (21).
6.
Install hose assembly (20) on elbow (21).
7.
Install bushing (19) and elbow (18) in fuel
tank.
8.
Install hose assembly (17).
Figure 6-57.
Figure 6-56.
Go to Sheet 5
6-78