TM 5-3805-261-20
FUEL SYSTEM MAINTENANCE. (cont.)
6-17.
Primary Element. (Sheet 4 of 4)
INSTALLATION
1.
Install gasket (8) and filter element (7)
into air cleaner (5).
2.
Install six nuts (6).’
3.
Install filter element (4) in air cleaner
(5, Figure 6-43) in left side of engine
compartment.
4.
If removed, apply thin strip of gasket
cement to new gasket (3, Figure 6-42)
and install.
5.
Install cover (2, Figure 6-41).
6.
Swing two eyebolts (1) over clips on
cover (2).
7.
Tighten two eyebolts (1) by hand only.
8.
Reset air cleaner indicator (6) by
pushing in button on bottom of air
cleaner indicator (6, Figure 6-44).
NOTE
•
If air cleaner indicator shows red
after performing this procedure,
then replacement of primary
and/or secondary filters may be
necessary.
•
Return 130G Grader to original
equipment condition.
Figure 6-43.
Figure 6-41.
Figure 6-44.
End of Task
6-62
