TM 5-3805-261-20
HYDRAULIC SYSTEM MAINTENANCE. (cont)
15-30.
Sideshift Lines. (Sheet 2 of 8)
REMOVAL
WARNING
All hose and tube assemblies must
be tagged before disconnecting to
aid in installation. Cap all hose and
tube ends and plug all open hydraulic
ports to prevent contamination.
1.
Disconnect two hose assemblies. Refer to
paragraph 15-24, steps16 and 17.
2.
Disconnect hose assemblies (13 and 14,
Figure 15-137) from left control valve group.
3.
Remove
connectors
(1
and
2)
and
preformed packings (3 and 4, Figure 15-
138).
4.
Remove two bolts (5), washers (6), clamp
(7), two spacers (8) and clamp (9, Figure
15-139).
5.
Remove two bolts (10), washers (11) and
clamps (12, Figure 15-140).
Figure 15-139.
Figure 15-137.
Figure 15-138.
Figure 15-140.
Go to Sheet 3
15-164
