TM 5-3805-261-20
HYDRAULIC SYSTEM MAINTENANCE.
15-30.
Sideshift Lines. (Sheet 3 of 8)
REMOVAL
6.
Remove hose assemblies (13 and 14) and
items 15 thru 18 (Figure 15-141) from top
of blade tip check valve. Refer to
paragraph 15-11, steps 1 4.
7.
Disconnect hose assemblies (33 and 34)
and remove items 19 thru 22 (Figure 15-
142) from bottom of blade tip check valve.
Refer to paragraph 15-11, steps 5 7.
8.
Remove two bolts (23), washers (24),
plates (25) and clamps (26, Figure 15-143).
9.
Remove bolt (27), washer (28), clamp (29),
bolt (30), washer 31) and clamp (32, Figure
15-144).
Figure 15-143.
Figure 15-141.
Figure 15-142.
Figure 15-144.
Go to Sheet 4
15-165
