TM 5-3805-261-20
HYDRAULIC SYSTEM MAINTENANCE.
15-15.
Articulation Check Valve. (Sheet 2 of 4)
REMOVAL
NOTE
All host and tube assemblies must be
tagged before disconnecting to aid in
installation. Cap all hose and tube
ends to prevent contamination.
1.
Disconnect hose assemblies (1 and 2) from
fitting (3) and elbow (5, Figure 15-22) under
center,
right
side
of
operator’s
compartment.
2.
Remove fitting (3) and preformed packing
(4). Discard preformed packing (4).
3.
Remove elbow (5), fitting (6) and preformed
packing (7). Discard preformed packing (7).
4.
Disconnect hose assembly (8, Figure 15-
23).
5.
Remove elbow (9) and preformed packing
(10). Discard preformed packing (10).
6.
Disconnect hose assembly (11).
7.
Remove elbow (12) and preformed packing
(13). Discard preformed packing (13).
8.
Remove three bolts (14), washers (15) and
valve assembly (16).
Figure 15-22.
Figure 15-23.
Go to Sheet 3
15-51
