TM 5-3805-261-20
HYDRAULIC SYSTEM MAINTENANCE.
15-14.
Right Blade Lift Check Valve. (Sheet 2 of 4)
REMOVAL
NOTE
All hose and tube assemblies must be
tagged before disconnecting to aid in
installation. Cap all hose and tube
ends to prevent contamination.
1.
Disconnect tee (1, Figure 15-20).
2.
Disconnect tee (2).
3.
Disconnect hose assembly (3).
4.
Disconnect hose assembly (4).
5.
Remove three bolts (5), washers (6) and
items 7 thru 15 as an assembly.
6.
Remove elbow (7) and preformed packing
(8,
Figure
15-21).
Discard
preformed
packing (8).
7.
Remove elbow (9) and preformed packing
(10). Discard preformed packing (10).
8.
Remove elbow (11) and preformed packing
(12). Discard preformed packing (12).
9.
Remove elbow (13) and preformed packing
(14). Discard preformed packing (14).
CLEANING
Clean all parts. Refer to Chapter 2.
Figure 15-20.
Figure 15-21.
Go to Sheet 3
15-47
