TM 5-3805-261-10
SECTIONALIZATION FOR AIR TRANSPORT - CONTINUED
0019 00
DISASSEMBLY - CONTINUED
NOTE
40,41,42
75 76
At this point, the rear frame can be
driven to air lift slinging location.
Before slinging, proceed with the
remaining disassembly steps.
76.
Disconnect remote control hoses (76) and wiring har-
ness (75) from machine.
77.
Install dust plugs on all connections.
397-1085
78.
Disconnect three remote control cables (40, 41, and
42) from machine cables and install dust covers.
6
LOCK BAR
79.
Remove two bolts (6) and pump driveshaft lock bar.
Store in front tool box.
397-1108
73
80.
Install cover (74) and two bolts (73) on remote control
box (72).
74
WARNING
Use extreme caution when handling heavy
72
parts. Provide adequate support and use
assistance during procedure. Failure to fol-
low this warning may result in injury to
personnel.
NOTE
397-1084
Remote control box weighs 68 lb (31 kg).
81.
With assistance, remove remote control box (72) from
rear frame and install on the top of front frame.
0019 00-19
