TM 5-3805-261-10
SECTIONALIZATION FOR AIR TRANSPORT - CONTINUED
0019 00
DISASSEMBLY - CONTINUED
CAUTION
DO NOT turn on auxiliary pump for more than 30 seconds. Allow pump to cool for 1 minute between each use.
NOTE
To relieve load on hitch, turn on battery disconnect switch, turn on auxiliary pump switch, and adjust blade
height as necessary. It may also be necessary to adjust screw jacks. Turn off battery disconnect switch.
46.
Remove six bolts (68) and washers (69) from outer circle on top of lower pivot pin (26).
47.
Install two pusher bolts in top of lower pivot pin (26).
48.
Tighten two pusher bolts alternately and remove lower pivot pin (26).
49.
Remove two pusher bolts.
68,69
26
PUSHER
BOLT HOLES
397-1111
PUSHER BOLT HOLES
50.
Install the two pusher bolts on top of upper pivot pin
(9).
51.
Tighten pusher bolts alternately and remove the upper
pivot pin (9).
52.
Remove two pusher bolts.
9
397-1125
0019 00-15
