TM 5-3805-293-23-5
0316
REMOVAL CONTINUED
000316
WARN I N G
Hydraulic oil is very slippery. Immediately wipe up any spills. Failure to follow this warning
may result in injury to personnel.
N OT E
Tag and mark hoses to aid in installation.
Cap and plug all lines and fittingsat removal to prevent contamination.
18. Disconnect hose (Figure 6, Item 5) and remove O-ring (Figure 6, Item 4) from tube (Figure 6, Item 3). Discard
O-ring.
19. Disconnect tube (Figure 6, Item 3) and remove O-ring (Figure 6, Item 2) from front valve (Figure 6, Item 1).
Discard O-ring.
20. Disconnect hose (Figure 6, Item 6) and remove O-ring (Figure 6, Item 7) from tube (Figure 6, Item 8). Discard
O-ring.
21. Disconnect tube (Figure 6, Item 8) and remove O-ring (Figure 6, Item 9) from front valve (Figure 6, Item 1).
Discard O-ring.
Figure 6. Front Valve.
0316
END OF TASK
CLEANING AND INSPECTION
000316
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0346).
END OF TASK