TM 5-3805-293-23-5
0311
REMOVAL CONTINUED
WARN I N G
Hydraulic oil is very slippery. Immediately wipe up any spills. Failure to follow this warning
may cause injury to personnel.
5. Disconnect hydraulic line (Figure 3, Item 4) from blade lift cylinder (Figure 3, Item 3).
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Failure to follow this warning may cause injury or death to
personnel.
6. Remove cotter pin (Figure 3, Item 1), pin (Figure 3, Item 2), two washers (Figure 3, Item 5), plates (Figure 3,
Item 6), and blade tip cylinder (Figure 3, Item 3) from machine. Discard cotter pin.
Figure 3. Blade Tip Cylinder Hydraulic Line and Rear Pin.
0311
END OF TASK
