TM 5-3805-293-23-5
0300
REMOVAL
000300
1. Remove bolt (Figure 1, Item 8) and washer (Figure 1, Item 9) from centershift lock solenoid retainer (Figure 1,
Item 10).
2. Disconnect centershift lock solenoid connector (Figure 1, Item 1) from implement wire harness connector
(Figure 1, Item 2).
3. Remove bolt (Figure 1, Item 7) and washer (Figure 1, Item 6) from centershift lock pressure sensor retainer
(Figure 1, Item 5).
4. Disconnect centershift lock pressure sensor connector (Figure 1, Item 4) from implement wire harness
connector (Figure 1, Item 3).
Figure 1. Centershift Lock Electrical Connectors.
0300
5. Remove locknut (Figure 2, Item 11), washer (Figure 2, Item 10), and centershift lock solenoid cartridge
(Figure 2, Item 9) from centershift lock solenoid (Figure 2, Item 1). Discard locknut.
6. Remove centershift lock solenoid (Figure 2, Item 1) from centershift lock (Figure 2, Item 6).
7. Remove centershift lock pressure sensor (Figure 2, Item 3) from centershift lock (Figure 2, Item 6).
WARN I N G
Hydraulic oil is very slippery. Immediately wipe up any spills. Failure to follow this warning
may cause injury to personnel.
N OT E
Tag and mark hoses to aid in installation.
8. Disconnect hydraulic hose (Figure 2, Item 8) from centershift lock (Figure 2, Item 6).
9. Disconnect hydraulic hose (Figure 2, Item 7) from centershift lock (Figure 2, Item 6).