TM 5-3805-293-23-5
0286
REMOVAL CONTINUED
N OT E
Tag all wires prior to removal to aid in installation.
4. Disconnect five pigtail connectors (Figure 4, Item 1) from cab lower wiring harness (Figure 4, Item 2).
5. Remove three bolts (Figure 4, Item 3), washers (Figure 4, Item 4) and brake pedal assembly (Figure 4, Item 5)
from cab.
Figure 4. Brake Pedal Assembly.
0286
6. If damaged, replace throttle position sensor (WP 0288).
7. If damaged, replace inching pedal position sensor (WP 0289).
8. If damaged, replace inching pedal switch (WP 0290).
9. If damaged, replace brake pedal limit switch and brake light limit switch (WP 0291).
END OF TASK
CLEANING AND INSPECTION
000286
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0346).
END OF TASK