TM 5-3805-293-23-4
0255
DISASSEMBLY CONTINUED
5. Loosen head (Figure 5, Item 1) and remove cylinder rod (Figure 5, Item 13) from cylinder housing (Figure 5,
Item 6).
6. Remove bolt (Figure 5, Item 9) and washer (Figure 5, Item 8) from cylinder rod (Figure 5, Item 13).
7. Remove piston (Figure 5 Item 7) and head (Figure 5, Item 1) from cylinder rod (Figure 5, Item 13).
8. Remove wear ring (Figure 5, Item 12), outer seal (Figure 5, Item 11) and inner seal (Figure 5, Item 10) from
piston (Figure 5, Item 7). Discard seal and wear ring.
9. Remove O-ring (Figure 5, Item 14), backup ring (Figure 5, Item 15), wiper seal (Figure 5, Item 2), U-cup seal
(Figure 5, Item 3), buffer seal (Figure 5, Item 4), and wear ring (Figure 5, Item 5) from head (Figure 5, Item 1).
Discard O-ring, backup ring, wiper seal, U-cup seal, buffer seal, and wear ring.
Figure 5. Articulation Cylinder.
0255
END OF TASK
CLEANING AND INSPECTION
000255
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0346).
END OF TASK