TM 5-3805-293-23-4
0255
INSTALLATION CONTINUED
N OT E
Install shims only if required.
4. Install shims (Figure 9, Item 9), pin (Figure 9, Item 8), new cotter pin (Figure 9, Item 1), spacer (Figure 9,
Item 7), washer (Figure 9, Item 6), and bolt (Figure 9, Item 5) on machine.
WARN I N G
Hydraulic oil is very slippery. Immediately wipe up any spills. Failure to follow this warning
may result in injury to personnel.
5. Install two new O-rings (Figure 9, Item 3) and two hydraulic hoses (Figure 9, Item 4) on left articulation cylinder
(Figure 9, Item 2).
Figure 9. Front Articulation Cylinder Hose and Pin.
0255