TM 5-3805-293-23-4
0255
REMOVAL CONTINUED
WARN I N G
Hydraulic oil is very slippery. Immediately wipe up any spills. Failure to follow this warning
may result in injury to personnel.
N OT E
Tag lines to aid in installation.
Plug and cap hydraulic lines to prevent le kage and contamination of hydraulic fluid.
a
Shims are installed on articulation cylinder as required and may not be present on
machine.
3. Remove two hydraulic hoses (Figure 2, Item 4) and O-rings (Figure 2, Item 3) from left articulation cylinder
(Figure 2, Item 2). Discard O-rings.
4. Remove cotter pin (Figure 2, Item 1), bolt (Figure 2, Item 5), washer (Figure 2, Item 6), spacer (Figure 2,
Item 7), pin (Figure 2, Item 8), and shims (Figure 2, Item 9) from machine. Discard cotter pin.
Figure 2. Front Articulation Cylinder Hose and Pin.
0255