TM 5-3805-293-23-4
0232
INSTALLATION CONTINUED
10. Install hose (Figure 17, Item 11) on machine.
11. Install new O-ring (Figure 17, Item 12) and connect hose (Figure 17, Item 11) to tee (Figure 17, Item 13).
12. Install spacer (Figure 17, Item 3), two clamps (Figure 17, Item 6), washer (Figure 17, Item 4), and bolt
(Figure 17, Item 5) on hydraulic service pack base (Figure 17, Item 2).
13. Install two clamps (Figure 17, Item 8), washers (Figure 17, Item 9), bolt (Figure 17, Item 7) and nut (Figure 17,
Item 1) on hoses (Figure 17, Item 10).
Figure 17. All-Wheel Drive Pump.
0232