TM 5-3805-293-23-4
0223
DISASSEMBLY
000223
1. Remove elbow fitting (Figure 4, Item 1) and O-ring (Figure 4, Item 2) from adapter (Figure 4, Item 9). Discard
O-ring.
2. Remove nut (Figure 4, Item 3) and bracket (Figure 4, Item 4) from adapter (Figure 4, Item 9).
3. Loosen clamp (Figure 4, Item 7) and remove hose (Figure 4, Item 8) from valve (Figure 4, Item 6).
4. Remove valve (Figure 4, Item 6) and O-ring (Figure 4, Item 5) from adapter (Figure 4, Item 9). Discard O-ring.
Figure 4. Drain Valve.
0223
END OF TASK
CLEANING AND INSPECTION
000223
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0346).
END OF TASK
ASSEMBLY
000223
1. Install new O-ring (Figure 4, Item 5) and valve (Figure 4, Item 6) on adapter (Figure 4, Item 9).
2. Install hose (Figure 4, Item 8) and tighten clamp (Figure 4, Item 7) on valve (Figure 4, Item 6).
3. Install bracket (Figure 4, Item 4) and nut (Figure 4, Item 3) on adapter (Figure 4, Item 9).
4. Install new O-ring (Figure 4, Item 2) and elbow fitting (Figure 4, Item 1) on adapter (Figure 4, Item 9).
END OF TASK