TM 5-3805-293-23-4
0210
REMOVAL CONTINUED
8. Disconnect tube (Figure 2, Item 2) and remove O-ring (Figure 2, Item 3) from manifold (Figure 2, Item 1).
Discard O-ring and remove tube from machine.
Figure 2. Manifold.
0210
END OF TASK
CLEANING AND INSPECTION
000210
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0346).
END OF TASK
INSTALLATION
000210
N OT E
Install all hoses and tubes as marked and tagged during removal.
1. Install new O-ring (Figure 2, Item 3) and connect tube (Figure 2, Item 2) to manifold (Figure 2, Item 1).