TM 5-3805-293-23-4
0210
REMOVAL
000210
WARN I N G
Hydraulic oil is very slippery. Immediately wipe up any spills. Failure to follow this warning
may result in injury to personnel.
N OT E
Tag and mark hoses and tubes to aid in installation.
1. Remove two clamps (Figure 1, Item 13) and hose (Figure 1, Item 14).
2. Remove four bolts (Figure 1, Item 2), washers (Figure 1, Item 3), and tube assembly (Figure 1, Item 4) from
hydraulic filter base (Figure 1, Item 1).
3. Remove and discard O-ring (Figure 1, Item 5) from tube assembly (Figure 1, Item 4).
4. Remove four bolts (Figure 1, Item 6), washers (Figure 1, Item 7), and tube assembly (Figure 1, Item 9) from
hydraulic filter base (Figure 1, Item 1).
5. Remove and discard O-ring (Figure 1, Item 8) from tube assembly (Figure 1, Item 9).
6. Remove two clamps (Figure 1, Item 11) and hose (Figure 1, Item 12) from two tubes (Figure 1, Items 9 and
10).
7. Remove hose (Figure 1, Item 12) and tube (Figure 1, Item 9) from machine.
N OT E
Engine enclosure removed in Figure 1 for clarity.
0210-2