TM 5-3805-293-23-4
0211
REMOVAL CONTINUED
WARN I N G
Hydraulic oil is very slippery. Immediately wipe up any spills. Failure to follow this warning
may result in injury to personnel.
N OT E
Assistance will be required during this procedure.
Tag and mark hoses and tubes to aid in installation.
Cap and plug all lines and fittings at removal to prevent contamination.
2. Remove nut (Figure 2, Item 5), washer (Figure 2, Item 6), and clamp (Figure 2, Item 3) from stud (Figure 2,
Item 4).
3. Remove stud (Figure 2, Item 4), clamp (Figure 2, Item 9), and spacer (Figure 2, Item 2) from tube (Figure 2,
Item 1) and machine.
4. Disconnect tube (Figure 2, Item 1) from tee (Figure 2, Item 8) and remove O-ring (Figure 2, Item 7). Discard
O-ring.
Figure 2. Front Left Tube on Tee.
0211
Change 1