TM 5-3805-293-23-4
0174
INSTALLATION CONTINUED
13. Position drain line (Figure 6, Item 1) in clip (Figure 6, Item 2) and tighten bolt (Figure 6, Item 3).
Figure 6. Drain Hose.
0174
END OF TASK
FOLLOW-ON TASKS
000174
1. Turn the engine start switch to the ON position for 2 minutes (TM 5-3805-293-10).
2. Determine if water separator (Figure 7, Item 1) is full of fuel. If water separator is not full of fuel, turn the engine
start switch OFF, then turn the engine start switch ON for 2 additional minutes.
3. When water separator (Figure 7, Item 1) is full of fuel, start the engine. Check for any fuel leaks.
Figure 7. Water Separator and Primary Fuel Filter.
0174
END OF TASK
END OF WORK PACKAGE