TM 5-3805-293-23-4
0174
INSTALLATION CONTINUED
9. Install new primary fuel filter (Figure 5, Item 1) on filter base (Figure 5, Item 2). Turn until seal contacts filter
base, then tighten an additional one-quarter to one-half turn.
10. Install new O-ring (Figure 5, Item 18) and water separator (Figure 5, Item 22) on primary fuel filter
(Figure 5, Item 1).
11. Install drain valve (Figure 5, Item 21), tube (Figure 5, Item 20) and tiedown strap (Figure 5, Item 19) on water
separator (Figure 5, Item 22).
12. Close drain valve (Figure 5, Item 21).
Figure 5. Water Separator, Primary Fuel Filter, and Base.
0174