TM 5-3805-293-23-3
0164
REMOVAL CONTINUED
N OT E
If performing this task on machine with serial number prefix RMY, skip step 15.
15. Disconnect AWD sensor (Figure 9, Item 7) from wire harness (Figure 9, Item 8).
16. Disconnect hydraulic hose (Figure 9, Item 1), remove fitting (Figure 9, Item 5), and two O-rings (Figure 9,
Item 4) from AWD piston motor (Figure 9, Item 6). Discard O-rings.
17. Disconnect hydraulic hose (Figure 9, Item 2), and remove fitting (Figure 9, Item 3) and two O-rings (Figure 9,
Item 9) from AWD piston motor (Figure 9, Item 6). Discard O-rings.
Figure 9. All-Wheel Drive Piston Motor Sensor Connector and Line.
0164
Change 1