TM 5-3805-293-23-3
0160
REMOVAL CONTINUED
Figure 2. Wheel Lean Arm.
0160
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure any lifting device used is in good condition and of
suitable load capacity. Keep clear of heavy parts supported only by lifting device. Failure
to follow this warning may cause injury or death to personnel.
N OT E
Wheel lean arm weighs approximately 500 lb (226 kg).
5. Using lifting device, remove wheel lean arm from machine and lower onto a flat surface.
6. Remove lifting device and sling from wheel lean arm.
END OF TASK