TM 5-3805-293-23-3
0149
REMOVAL
000149
1. Remove cotter pin (Figure 1, Item 2), washer (Figure 1, Item 3), and rod (Figure 1, Item 1) from panel
(Figure 1, Item 4). Discard cotter pin.
2. Remove four bolts (Figure 1, Item 6), washers (Figure 1, Item 5), and panel (Figure 1, Item 4) from machine.
Figure 1. Enclosure Panel.
0149
3. Disconnect wiring harness connector (Figure 2, Item 3) from transmission input speed sensor (Figure 2,
Item 9) and remove tiedown strap (Figure 2, Item 4). Discard tiedown strap.
4. Remove bolt (Figure 2, Item 7), washer (Figure 2, Item 6), clip (Figure 2, Item 5), and bracket (Figure 2, Item 2)
from transmission assembly (Figure 2, Item 1).
5. Remove transmission input speed sensor (Figure 2, Item 9) and O-ring (Figure 2, Item 8) from transmission
assembly (Figure 2, Item 1). Discard O-ring.
Figure 2. Transmission Input Speed Sensor.
0149
END OF TASK