TM 5-3805-293-23-3
0149
CLEANING AND INSPECTION
000149
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0346).
END OF TASK
INSTALLATION
000149
1. Install new O-ring (Figure 2, Item 8) on transmission input speed sensor (Figure 2, Item 9). Install transmission
input speed sensor (Figure 2, Item 9) on transmission assembly (Figure 2, Item 1).
2. Install bracket (Figure 2, Item 2), clip (Figure 2, Item 5), washer (Figure 2, Item 6) and bolt (Figure 2, Item 7) on
transmission assembly (Figure 2, Item 1).
3. Connect wiring harness connector (Figure 2, Item 3) to transmission input speed sensor (Figure 2, Item 9) and
install new tiedown strap (Figure 2, Item 4).
4. Install panel (Figure 1, Item 4), four washers (Figure 1, Item 5), and bolts (Figure 1, Item 6) on machine.
5. Install rod (Figure 1, Item 1), washer (Figure 1, Item 3), and new cotter pin (Figure 1, Item 2) on panel
(Figure 1, Item 4).
END OF TASK
FOLLOW-ON TASKS
000149
Verify correct operation of machine (TM 5-3805-293-10).
END OF TASK
END OF WORK PACKAGE
0149-3/(4 blank)