TM 5-3805-293-23-3
0120
REMOVAL CONTINUED
9. Attach sling and lifting device to implement and steering pump (Figure 2, Item 3).
10. Remove four bolts (Figure 2, Item 1) and washers (Figure 2, Item 2) from implement and steering pump
(Figure 2, Item 3).
Figure 2. Implement and Steering Pump Removal.
0120
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure that any lifting device used is in good condition and
of suitable load capacity. Keep clear of heavy parts supported only by lifting device. Failure
to follow this warning may result in injury or death to personnel.
N OT E
Implement and steering pump weighs 115 lb (52 kg).
11. Using lifting device, remove implement and steering pump (Figure 2, Item 3) from machine and lower onto flat
surface.
12. Remove sling and lifting device from implement and steering pump (Figure 2, Item 3).
13. Remove O-ring (Figure 2, Item 4) from implement and steering pump (Figure 2, Item 3). Discard O-ring.
END OF TASK
