TM 5-3805-293-23-3
0120
REMOVAL
000120
WARN I N G
Hydraulic oil is very slippery. Immediately wipe up any spills. Failure to follow this warning
may result in injury to personnel.
N OT E
Tag and mark hoses to aid in installation.
1. Disconnect tube (Figure 1, Item 1) and remove two O-rings (Figure 1, Item 2 and Item 11) from implement and
steering pump (Figure 1, Item 5) and manifold (Figure 1, Item 12). Discard O-rings.
2. Remove elbow (Figure 1, Item 3) and O-ring (Figure 1, Item 4) from implement and steering pump (Figure 1,
Item 5). Discard O-ring.
3. Disconnect hose (Figure 1, Item 10) and remove O-ring (Figure 1, Item 9) from implement and steering pump
(Figure 1, Item 5). Discard O-ring.
4. Disconnect hose (Figure 1, Item 13) and remove O-ring (Figure 1, Item 14) from tee (Figure 1, Item 16). Dis-
card O-ring.
5. Remove four capscrews (Figure 1, Item 6), elbow (Figure 1, Item 8), and O-ring (Figure 1, Item 7) from imple-
ment and steering pump (Figure 1, Item 5). Discard O-ring.
6. Remove cap (Figure 1, Item 22), coupling (Figure 1, Item 21) and O-ring (Figure 1, Item 20) from elbow
(Figure 1, Item 19). Discard O-ring.
7. Remove elbow (Figure 1, Item 19) and O-ring (Figure 1, Item 17) from tee (Figure 1, Item 16). Discard O-ring.
8. Remove tee (Figure 1, Item 16) and O-ring (Figure 1, Item 15) from pressure control valve (Figure 1, Item 18).
Discard O-ring.
0120-2
