TM 5-3805-293-23-3
0118
REMOVAL
000118
WARN I N G
Hydraulic oil is very slippery. Immediately wipe up any spills. Failure to follow this warning
may result in injury or death to personnel.
N OT E
Tag and mark lines to aid in installation.
1. Disconnect hydraulic hose (Figure 1, Item 1) and remove O-ring (Figure 1, Item 2) from AWD piston pump
(Figure 1, Item 7). Discard O-ring.
2. Disconnect hydraulic hose (Figure 1, Item 5) and remove O-ring (Figure 1, Item 8) from elbow on AWD piston
pump (Figure 1, Item 7). Discard O-ring.
3. Disconnect hydraulic hose (Figure 1, Item 5) and remove O-ring (Figure 1, Item 4) from AWD control manifold
(Figure 1, Item 3). Discard O-ring. Remove hose from machine.
4. Disconnect hydraulic hose (Figure 1, Item 1) and remove O-ring (Figure 1, Item 6) from elbow on AWD control
manifold (Figure 1, Item 3). Discard O-ring. Remove hose from machine.
Figure 1. AWD Control Manifold and AWD Pumps.
0118