TM 5-3805-293-23-3
0118
REMOVAL CONTINUED
WARN I N G
Hydraulic oil is very slippery. Immediately wipe up any spills. Failure to follow this warning
may result in injury or death to personnel.
N OT E
Rear view of all wheel drive pump with cooling module removed is shown in Figure 4 for
clarity.
8. Disconnect hydraulic hose (Figure 4, Item 1) and remove O-ring (Figure 4, Item 13) from elbow on AWD pump
(Figure 4, Item 10). Discard O-ring.
9. Disconnect hydraulic hose (Figure 4, Item 11) and remove O-ring (Figure 4, Item 12) from elbow on AWD
pump (Figure 4, Item 10). Discard O-ring. Remove hose from machine.
10. Disconnect hydraulic hose (Figure 4, Item 3) and remove O-ring (Figure 4, Item 2) from elbow on AWD pump
(Figure 4, Item 10). Discard O-ring.
11. Disconnect hydraulic hose (Figure 4, Item 7) and remove O-ring (Figure 4, Item 6) from elbow (Figure 4,
Item 5). Discard O-ring. Remove hose from machine.
12. Remove elbow (Figure 4, Item 5) and O-ring (Figure 4, Item 4) from AWD pump (Figure 4, Item 10). Discard
O-ring.
13. Disconnect hydraulic hose (Figure 4, Item 8) and remove O-ring (Figure 4, Item 9) from AWD pump (Figure 4,
Item 10). Discard O-ring.
0118-4