TM 5-3805-293-23-3
0110
REMOVAL
000110
N OT E
Tag and mark wires to aid in installation.
1. Slide lock tab (Figure 1, Item 5) back, and press down and disconnect electrical connector (Figure 1, Item 4)
from engine speed sensor (Figure 1, Item 3).
2. Remove bolt (Figure 1, Item 2), engine speed sensor (Figure 1, Item 3) and O-ring (Figure 1, Item 1) from
engine (Figure 1, Item 6). Discard O-ring.
Figure 1. Speed Sensor.
0110
END OF TASK
CLEANING AND INSPECTION
000110
1. Clean and inspect all mechanical parts IAW Mechanical General Maintenance Instructions (WP 0346).
2. Clean and inspect all electrical parts IAW Electrical General Maintenance Instructions (WP 0347).
END OF TASK