TM 5-3805-293-23-3
0098
ARC SUPPRESSOR REMOVAL
00098
1. Remove tiedown strap (Figure 2, Item 2) from arc suppressor (Figure 2, Item 1). Discard tiedown strap.
2. Disconnect arc suppressor (Figure 2, Item 1) from wiring harness connector (Figure 2, Item 3).
Figure 2. Arc Suppressor.
0098
END OF TASK
CLEANING AND INSPECTION
00098
Clean and inspect all electrical parts IAW Electrical General Maintenance Instructions (WP 0347).
END OF TASK
ARC SUPPRESSOR INSTALLATION
00098
1. Connect arc suppressor (Figure 2, Item 1) to wiring harness connector (Figure 2, Item 3).
2. Install new tiedown strap (Figure 2, Item 2) to arc suppressor (Figure 2, Item 1).
END OF TASK
THERMOSTAT PULL RESISTOR INSTALLATION
00098
1. Connect thermostat pull resistor (Figure 1, Item 3) to wiring harness connector (Figure 1, Item 2).
2. Install new tiedown strap (Figure 1, Item 1) on thermostat pull resistor (Figure 1, Item 3).
END OF TASK