TM 5-3805-293-23-3
0091
CLEANING AND INSPECTION
00091
Clean and inspect all parts IAW Mechanical General Maintenance (WP 0346).
END OF TASK
INSTALLATION
00091
1. Install new O-ring (Figure 1, Item 8) and engine oil dipstick tube (Figure 1, Item 4) on engine (Figure 1, Item 1)
and torque nut (Figure 1, Item 7) to 13 lb-ft (18 Nm).
2. Install bracket (Figure 1, Item 5) and bolt (Figure 1, Item 6) on engine (Figure 1, Item 1).
3. Install clamp (Figure 1, Item 3), and bolt (Figure 1, Item 2), on bracket (Figure 1, Item 5).
N OT E
If removed, install two O-rings on dipstick.
4. Install engine oil dipstick (Figure 1, Item 9) in engine oil dipstick tube (Figure 1, Item 4).
END OF TASK
FOLLOW-ON TASKS
00091
Install engine enclosure (WP 0225).
END OF TASK
END OF WORK PACKAGE
0091-3/(4 blank)