TM 5-3805-293-23-3
0087
OIL FILTER REMOVAL
00087
N OT E
Keep oil filter upright during removal.
Remove oil filter (Figure 3, Item 3) and gasket (Figure 3, Item 2) from filter head (Figure 3, Item 1). Dispose of oil
filter IAW unit's SOP. Discard gasket.
Figure 3. Oil Filter.
0087
END OF TASK
OIL FILTER INSTALLATION
00087
1. Lightly coat gasket (Figure 3, Item 2) of new oil filter (Figure 3, Item 3) with clean oil.
2. Install oil filter (Figure 3, Item 3) by hand until filter gasket contacts filter head (Figure 3, Item 1). Tighten oil
filter an additional 1/2 turn.
END OF TASK
FILL ENGINE OIL
00087
1. Close crankcase drain valve (Figure 2, Item 1).
2. Add engine oil (WP 0047).
3. Install oil filler cap (Figure 1, Item 1) on oil filler (Figure 1, Item 2).