6
TM 5-3805-293-23-3
FIELD MAINTENANCE
-
ENGINE OIL FILTER BASE REPLACEMENT
0
088
Removal, Cleaning and Inspection, Installation
INITIAL SETUP
Tools and Special Tools
Materials/Parts - Continued
0
0
Tool Kit, General Mechanic's
Gasket
0
(WP 0354, Item 83)
Oil filter
0
0
Wrench, Oil Filter, Strap (S0982)
References
(WP 0354, Item 85)
0
0
WP 0346
0
Materials/Parts
0
Equipment Condition
Oil, Lubricating OEA, Arctic
0
Machine parked (TM 5-3805-293-10)
(WP 0355, Item 19)
0
0
Oil, Lubricating OE/HDO-10
Drawings Required
0
(WP 0355, Item 20)
0
TM 5-3805-293-24P, Figure 32
Oil, Lubricating OE/HDO-30
0
(WP 0355, Item 21)
Estimated Time to Complete
0
0
Rag, Wiping (WP 0355, Item 25)
0
0.5 Hr
0
WARN I N G
Engine oil should be warm to ensure it dains completely from crankcase. Use caution to
r
protect against burns, when draining oil.
Contact with engine oil can damage skin. Wear gloves when handling engine oil. If oil
contacts skin, wash it off immediately.
Lubricating oil is very slippery. Immediately wipe up any spills.
When servicing this machine, performing mainenance, or disposing of materials such as
t
engine coolant, hydraulic fluid, lubricants, battery acids or batteries, and CARC paint,
consult your unit/local hazardous waste disposal center or safety office for local regulatory
guidance. If further information is needed, please contact The Army Environmental Hotline
at 1-800-872-3845.
Failure to follow these warnings ma result in injury to personnel.
y
0088-1