TM 5-3805-293-23-3
0069
ENGINE STAND DISMOUNTING CONTINUED
5. Install two new gaskets (Figure 29, Item 23), plates (Figure 29, Item 24) and eight bolts (Figure 29, Item 22) on
engine (Figure 29, Item 25).
6. Install new O-ring (Figure 29, Item 15), plate (Figure 29, Item 17), clip (Figure 29, Item 16), and two bolts
(Figure 29, Item 18), on engine (Figure 29, Item 25).
7. Reposition bracket (Figure 29, Item 14) on engine (Figure 29, Item 25) and install three washers (Figure 29,
Item 13), and bolts (Figure 29, Item 12), on bracket.
8. Install clip (Figure 29, Item 21), clip (Figure 29, Item 19) and bolt (Figure 29, Item 20) on engine (Figure 29,
Item 25).
9. Install positive cable (Figure 29, Item 11), new lockwasher (Figure 29, Item 8), washer (Figure 29, Item 9), and
nut (Figure 29, Item 10), on alternator (Figure 29, Item 1).
10. Connect connector (Figure 29, Item 7) to alternator (Figure 29, Item 1).
11. Install negative cable (Figure 29, Item 3), new lockwasher (Figure 29, Item 4), washer (Figure 29, Item 6), and
bolt (Figure 29, Item 5), on alternator (Figure 29, Item 1).
12. Reposition two boots (Figure 29, Item 2) on electrical connections.
Figure 29. Engine Stand Recovery.
0069