TM 5-3805-293-23-3
0065
REMOVAL CONTINUED
7. Remove two tiedown straps (Figure 3, Item 4) from starter wiring harness (Figure 3, Item 6). Discard tiedown
straps.
8. Remove two bolts (Figure 3, Item 20), washers (Figure 3, Item 21) and three clamps (Figure 3, Items 5 and 19)
from bracket (Figure 3, Item 22).
9. Remove bolt (Figure 3, Item 1), washer (Figure 3, Item 2) and clip (Figure 3, Item 3) from bracket (Figure 3,
Item 22).
10. Remove nut (Figure 3, Item 16), washer (Figure 3, Item 17), clamp (Figure 3, Item 18), bolt (Figure 3, Item 14),
washer (Figure 3, Item 15), and clip (Figure 3, Item 7) from bracket.
11. Remove harness connector (Figure 3, Item 12) from clip (Figure 3, Item 11).
12. Remove bolt (Figure 3, Item 8), washer (Figure 3, Item 9), clip (Figure 3, Item 11), clamp (Figure 3, Item 13),
and spacer (Figure 3, Item 10) from engine.
13. Remove starter wiring harness (Figure 3, Item 6) from machine.
Figure 3. Right Side Starter Wiring Harness Removal.
0065
