TM 5-3805-293-23-3
0065
INSTALLATION CONTINUED
12. Install clamp (Figure 7, Item 6), spacer (Figure 7, Item 7), two clamps (Figure 7, Item 3), washer (Figure 7,
Item 5) and bolt (Figure 7, Item 4) on bracket (Figure 7, Item 8).
13. Connect starter motor relay connector (Figure 7, Item 9) to rear harness (Figure 7, Item 2).
14. Connect service charge pressure connector (Figure 7, Item 1) to rear harness (Figure 7, Item 2).
Figure 7. Left Side Starter Harness Clamps.
0065
END OF TASK
FOLLOW-ON TASKS
00065
Install starter motor (WP 0099).
END OF TASK
END OF WORK PACKAGE
