TM 5-3805-293-23-3
0061
REMOVAL CONTINUED
WARN I N G
Hydraulic oil is very slippery. Immediately wipe up any spills. Failure to follow this warning
may result in injury to personnel.
N OT E
Tag and mark hoses to aid in installation.
Cap and plug hoses and openings to prevent contamination.
18. Disconnect hose (Figure 5, Item 1) and remove O-ring (Figure 5, Item 2) from control manifold (Figure 5,
Item 3). Discard O-ring.
19. Remove hose (Figure 5, Item 1) from machine.
20. Disconnect hose (Figure 5, Item 6) and remove O-ring (Figure 5, Item 7) from control manifold (Figure 5,
Item 3). Position hose aside and discard O-ring.
21. Disconnect tube (Figure 5, Item 5) and remove O-ring (Figure 5, Item 4) from control manifold (Figure 5,
Item 3). Discard O-ring.
22. Remove tube (Figure 5, Item 5) and hose (Figure 5, Item 8) from machine.
Figure 5. Control Manifold Tube and Hoses.
0061