TM 5-3805-293-23-3
0056
REMOVAL CONTINUED
WARN I N G
Hydraulic oil is very slippery. Immediately wipe up any spills. Failure to follow this warning
may result in injury to personnel.
N OT E
Plug and cap hoses and fittings.
Tag and mark hoses to aid in installation.
7. Disconnect hose (Figure 3, Item 1), and remove O-ring (Figure 3, Item 2) from All-wheel drive (AWD) bypass
valve (Figure 3, Item 3). Discard O-ring. Remove hose from machine.
Figure 3. AWD Bypass Valve.
0056
END OF TASK
CLEANING AND INSPECTION
00056
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0346).
END OF TASK