TM 5-3805-293-23-3
0055
INSTALLATION CONTINUED
WARN I N G
Hydraulic oil is very slippery. Immediately wipe up any spills. Failure to follow this warning
may result in injury to personnel.
3. Install new O-ring (Figure 8, Item 5) and elbow (Figure 8, Item 4) on hydraulic oil cooler core (Figure 8, Item 2).
4. Install new O-ring and connect right-side hose (Figure 8, Item 1) to hydraulic oil cooler core (Figure 8, Item 2).
Figure 8. Right-Side Hydraulic Hose.
0055
END OF TASK
FOLLOW-ON TASKS
00055
1. Check hydraulic system oil level (WP 0217).
2. Remove vacuum cap from hydraulic tank (WP 0221).
3. Install engine enclosure (WP 0225).
END OF TASK
END OF WORK PACKAGE