TM 5-3805-293-23-3
0052
PRESSURE CAP INSPECTION CONTINUED
3. Inspect pressure cap O-rings (Figure 8, Item 1) for tearing or deformation. Replace pressure cap (Figure 8,
Item 3) if tearing or deformation is found.
4. Inspect pressure cap seal (Figure 8, Item 2) for deformation. Replace pressure cap (Figure 8, Item 3) if defor-
mation is found.
Figure 8. Pressure Cap.
052
5. Install cooling system cap (Figure 7, Item 1).
6. Close cooling system cap access cover (Figure 9, Item 1).
Figure 9. Cooling System Access Cover.
052
END OF TASK
END OF WORK PACKAGE
Change 1