TM 5-3805-293-23-3
0043
POWERTRAIN CHARGE SYSTEM PRESSURE TEST AND ADJUST CONTINUED
00043
12. Release and engage parking brake (TM 5-3805-293-10).
13. Check 580 psi hydraulic gauge (Figure 13, Item 1). If reading has changed, repeat step 10.
Figure 13. Test Port Pressure.
0043
14. Turn off the engine (TM 5-3805-293-10).
15. Install new O-ring (Figure 14, Item 6), cover (Figure 14, Item 5), two washers (Figure 14, Item 2) and bolts
(Figure 14, Item 1) on machine.
16. Disconnect hose (Figure 14, Item 3) from fitting (Figure 14, Item 4).
Figure 14. Hose and Fitting.
0043
