TM 5-3805-293-23-2
0031
Table 1. Implement Code (2200-00 TO 2954-14) Troubleshooting Procedures - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
2212-06 Auxiliary Valve #1
Test Step 3. Test Cab Lower Wiring
Port B Solenoid Current
Harness.
Above Normal - Continued
1. Turn ignition switch and battery
disconnect switch to the OFF
position (TM 5-3805-293-10).
2. Disconnect front attachment har-
ness connector U-C1 (WP 0009,
Figure 121) from cab lower har-
ness connector P-C50 (WP 0009,
Figure 120).
3. Using digital multimeter, test for
Continuity - Replace front
continuity between harness con-
attachment wiring harness (WP
nector U-C1 (WP 0009, Figure
0180).
121) terminal 5 and all other ter-
Proceed to step 6.
minals on harness connector U-
No Continuity - Proceed to step 4.
C1.
There should be no continuity.
4. Disconnect cab lower wiring har-
ness connector P-C45 (WP 0009,
Figure 72) from implement 2 ECM
J1 (WP 0009, Figure 73) (WP
0268).
5. Using digital multimeter, test for
Continuity - Replace cab lower wiring
continuity between harness con-
harness (WP 0266).
nector P-C45 (WP 0009, Figure
Connect front attachment harness
72) terminal 58 and all other ter-
connector U-C14 (WP 0009, Figure
minals on harness connector P-
244) to auxiliary valve #1 port a
C45 and to machine ground.
(scarifier lower) solenoid (WP 0009,
There should be no continuity.
Figure 245), and install front frame
nose cover (WP 0224).
Proceed to step 6.
No Continuity - Replace implement 2
ECM (WP 0268).
Connect front attachment harness
connector U-C1 (WP 0009, Figure
121) to cab lower harness connector
P-C50 (WP 0009, Figure 120).
Connect front attachment harness
connector U-C14 (WP 0009, Figure
244) to auxiliary valve #1 port B
(scarifier lower) solenoid (WP 0009,
Figure 245), and install front frame
nose cover (WP 0224).
Proceed to step 6.
0031-120
