TM 5-3805-293-23-2
0031
Table 1. Implement Code (2200-00 TO 2954-14) Troubleshooting Procedures - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
2212-05 Auxiliary Valve #1
7. Using digital multimeter, test for
Resistance 5.0 Ohms or Less -
Port B Solenoid Current
continuity between harness con-
Replace implement 2 ECM (WP
Below Normal - Continued
nector P-C45 (WP 0009, Figure
0268).
72) terminal 58 and terminal 60.
Remove jumper wire from harness
Resistance should be less than
connector P-C50 (WP 0009, Figure
5.0 Ohms.
120) terminal 5 and terminal 35.
Connect front attachment harness
connector U-C14 (WP 0009, Figure
244) to auxiliary valve #1 port B
(scarifier lower) solenoid (WP 0009,
Figure 245), and install front frame
nose cover (WP 0224).
Proceed to step 8.
Resistance More Than 5.0 Ohms -
Replace cab lower wiring harness
(WP 0266).
Connect front attachment harness
connector U-C14 (WP 0009, Figure
244) to auxiliary valve #1 port B
(scarifier lower) solenoid (WP 0009,
Figure 245), and install front frame
nose cover (WP 0224).
Proceed to step 8.
8. Using MSD (WP 0006), select
2212-05 Code Active - Repeat
Implement 120M and verify 2212- troubleshooting code from the
05 is active.
beginning.
2212-05 Code Not Active -
Troubleshooting complete.
0031-118
